₱37,000.00
The rugged SLX Wireless Systems from Shure bring unparalleled ease of set-up and exceptional audio quality into reach. With included accessories, SLX is also installation-ready, out-of-the-box and with a wide selection of legendary Shure microphones ...
Availability: Out Of Stock
- Brand: Shure
The rugged SLX Wireless Systems from Shure bring unparalleled ease of set-up and exceptional audio quality into reach. With included accessories, SLX is also installation-ready, out-of-the-box and with a wide selection of legendary Shure microphones to choose from, SLX offers a tailored solution for virtually any application.
Easy Setup
- Automatic Frequency Selection
- Automatic Transmitter Setup
- Removable antennas and rack hardware included
Exceptional Audio quality
- Shure’s Patented Audio Reference Companding improves sound quality
- Wide s selection of Shure microphone heads, headsets and lavaliers
- Predictive Diversity technology for improved transmission quality
Complete installation solutions
- Up to 12 compatible frequencies per band
- Furnished rack hardware included for single or double mounted installation in a standard 19“ rack.
- Detachable 1/4 wave antennas
- Rugged metal chassis
- Multi-function, backlit LCD on transmitter and receiver
| System technical specifications | |
|---|---|
| Compatible systems per frequency band: | 12 |
| Auto Setup Features: | Scan/Sync |
| Audio Reference Companding: | Yes |
| Included Antennas: | Detachable 1/4-wave |
| Antenna Options: | Yes |
| PC Control: | No |
| Receiver Network Ability: | No |
| Rack Hardware: | Included |
| Case: | Optional System Case (WA610) |
| Transmitter Display: | Backlit LCD + Multi-color LED |
| Receiver Display: | Backlit LCD + LED |
| Battery, Endurance: | 2AA, >8 h |
| Environment: | Conference rooms, seminars, churches, theatres, music clubs |
| Further Technical Specs | |
| Dimensions: | 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.) |
| Weight: | 816 g (1 lb. 13 oz.) |
| Housing: | Galvanized steel |
| Audio Output Level : | (ref. +/– 38 kHz deviation with 1 kHz tone) |
| XLR connector (into 600 Ohms load): | –13 dBV |
| 1/4 inch connector (into 3000 Ohms load): | –2 dBV |
| Output Impedance | |
| XLR connector: | 200 Ohms |
| 1/4 inch connector: | 1kOhms |
| XLR output | |
| Impedance: | balanced |
| Pin 1: | Ground |
| Pin 2: | (+) |
| Pin 3: | (-) |
| Sensitivity: | –105 dBm for 12 dB SINAD, typical |
| Image Rejection: | >70 dB, typical |
| Power Requirements: | 12–18 Vdc at 150 mA, supplied by external power supply |
| Operating Range Under Typical Conditions: | 100m (300 ft.) |
| Note: Actual range depends on RF signal absorption, reflection, and interference | |
| Audio Frequency Response (+/– 2 dB) | |
| Minimum: | 45 Hz |
| Maximum: | 15 kHz |
| Note: Overall system frequency depends on microphone element. | |
| Total Harmonic Distortion (ref. +/– 38 kHz deviation, 1 kHz tone): | 0.5%, typical |
| Dynamic Range: | >100 dB A-weighted |
| Operating Temperature Range: | –18°C (0°F) to +50°C (+122°F) |
| Note: | battery characteristics may limit this range |
Transmitter Audio Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
| Logic Connections (SLX4L only) | |
|---|---|
| Pin 1: | Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC |
| Pin 2: | Logic ground |
| Pin 3: | Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA.Absolute maximum -0.7 to 5.5V DC |
