15-Watt Paging HornThe Commercial Solutions Series CSS-H15 Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications. Designed for demanding environmental...
Availability: In Stock
The Commercial Solutions Series CSS-H15 Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications. Designed for demanding environmental conditions, the CSS-H15 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The wide coverage pattern allows the horn to cover a larger audience area than is the case with many paging horns.
Typical applications for this product are public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centers, civic centers, and other commercial sound and protectivesignaling systems.
The CSS-H15 includes a UL-registered 15-watt multi-tap transformer for use with 70V or 100V distributed speaker lines. The power tap switch is screwdriver adjustable for easily changing settings from 15W, 7.5W, 3.8W, 1.9W (and 0.9W at 70V only). For non-distributed systems there is an 8 ohm bypass position. Connection is via bare wire on a built-in jacketed cable with water-tight entrance to the speaker.
| System | |
|---|---|
| Frequency Response (-10 dB): | 400 Hz – 7.5 kHz |
| Coverage Pattern | 70°(degree) horizontal by 90° vertical (at 2 kHz and averaged 1 kHz – 4 kHz) |
| Included High-Pass Filter: | Passive 350 Hz high-pass filter built-in to protect against damage from frequencies below operational range |
| Directivity (Q): | 10.9 (2 kHz) |
| Directivity Index (DI): | 10.4 (2 kHz) |
| System Power Rating : | : 15 W (60 W peak), 100 hrs |
| Sensitivity (1W, 2.83V@ 1m): | 105 dB, ave. 1 kHz – 6 kHz; 111 dB at 2 kHz |
| Maximum SPL (1m): | 117 dB cont ave. (123 dB peak), 1 kHz – 6 kHz; 123 dB cont ave. (129 dB peak), 2 kHz, 15W input, 8 ohm setting |
| Nominal Impedance : | 15W/70V, NC/100V tap: 333 ohms 7.5W/70V, 15W/100V tap: 667 ohms 3.8W/70V, 7.5W/100V tap: 1333 ohms 1.9W/70V, 3.8W/100V tap: 2666 ohms 0.9W/100V, 1.9W/100V tap:5332 ohms 8 ohms at 8 ohm direct setting |
| Transformer Taps: | 70V: 15W, 7.5W, 3.8W, 1.9W. 0.9W 100V: 15W, 7.5W, 3.8W, 1.9W |
| Transducers | |
|---|---|
| Full-Range Driver: | 33 mm (1.3 in) diameter with phenolic diaphragm |
| Physical | |
|---|---|
| Horn Material: | ABS |
| Mounting Hardware: | Stainless steel powder-coated U-bracket (yolk) with 3 x 8.8 mm (0.34 in) dia mounting holes, stainless steel exterior hardware. |
| Color: | RAL9016 (horn and bracket) |
| Input Connection: | 300 mm (12 in) pigtail to bare wire; entrance via watertight fitting. Wire colors: red = positive (+); black = negative (-) |
| Environmental: | IP-65 rating per IEC529, salt spray per B117, stainless steel U-bracket and exterior hardware |
| Safety Agency: | Transformer UL Registered per UL1876 "Isolating Signal and Feedback Transformers for Use in Electronic Equipment" |
| Dimensions (H x W x D): | 163 x 222 x 232 mm (6.5 x 8.8 x 9.2 in) horn 181 x 222 x 232 mm (7.1 x 8.8 x 9.2 in) including mounting bracket. Depth excludes cable exit |
| Weight (ea): | 3.0 lb/1.36 kg |
| Shipping Weight (ea): | 3.7 lb/1.68 kg |
| Included Accessories: | Stainless steel mounting bracket |