₱65,000.00
CDi 2|300 Analog input, 2 channel, 300W per output channel The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our...
Availability: 2-3 Days
- Brand: Crown
CDi 2|300
Analog input, 2 channel, 300W per output channel
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more.
Designed for ease-of-use in a variety of applications, the 2|300 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.
The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
| Output Power: Dual Mode - All Channels Driven | |
|---|---|
| CDi DriveCore Model: | 2|300 |
| Channels: | 2 |
| 2Ω (Ohms): | 150W |
| 4Ω (Ohms): | 300W |
| 8Ω (Ohms): | 300W |
| 16Ω (Ohms): | 150W |
| 70Vrms: | 300W |
| 100Vrms: | 300W |
| Output Power: Bridge Mono Mode - All Channels Driven | |
|---|---|
| CDi DriveCore Model: | 2|300 |
| 4Ω (Ohms): | 300W |
| 8Ω (Ohms): | 600W |
| 16Ω (Ohms): | 600W |
| 70Vrms: | 600W |
| 100Vrms: | 600W |
Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 - 240Vrms - 50/60Hz)
Features
- DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
- Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
- DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration
- Input Router
- Input Delay – Up to 1000ms
- Input Parametric EQ – 8 band
- Crossover
- Output Parametric EQ – 8 band
- Output Delay – Up to 100ms LevelMAX™ Limiter
- BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link
- Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.
- Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.
- GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.
| Specifications | |
|---|---|
| BLU link: | No |
| Channels: | 2 |
| Sensitivity: | 0.7V RMS |
| Rated Power Output: | 300W |
| Analog Input Signal to Noise Ratio: | > 104dB |
| THD (full rated power, 20 Hz - 20 kHz): | 0.35% |
| Damping Factor (20 Hz to 100 Hz): | > 1000 |
| Frequency Response (8 Ohms, 20 Hz - 20 kHz): | +/-0.5dB |
| Crosstalk (below rated power) 20 Hz to 1 kHz | > 80dB |
| Input Impedance (nominally balanced, nominally unbalanced): | 20 k Ohms balanced, 10 k Ohms unblanced |
| Dimensions (inches) (W x H x D): | 19 x 3.5 x 12.25 |
| Weight: | 14.56 lbs (6.6 kg) |
| Power Supply Connector: | Standard IEC type 320 inlet for detachable connector 100 – 240V~ |
